Welcome To Fly Virtual
Flight UAL839
  • Submitted By: Andre Mclean
  • Departure Airport: Los Angeles International Airport (KLAX)
  • Arrival Airport: Sydney International Airport (YSSY)
  • Aircraft: B789 (B789)
  • Flight Time: 11.03
  • Date Submitted: 10/14/2021
  • Route: SUMMR2 FICKY B581 WEDES 28N130W 25N135W 21N140W 14N150W 08N160W 02N170W 05S180E 14S170E 21S163E 25S160E CBULA BANDA J70 CORKY H12 BOREE BORE3A
  • Status: Rejected
Flight Details
Gross Revenue:
(235 load / $ 900.00 per unit
$ 211, 500.00
Fuel Cost:
(178432 fuel used @ 0.78 / unit)
$ 139, 176.96

Additional Log Information:

smartCARS version 2.1.35.0, 2021/10/13 UTC
[16:49:17] Preflight started, flying on VATSIM
[16:49:18] Flying QualityWings 787-9 United Airlines -SATCOM
[16:58:53] Pushing back with 206508 lb of fuel
[17:00:31] Engine 2 is on
[17:00:33] Engine 1 is on
[17:02:11] Flaps set to position 2
[17:04:04] Taxiing to runway
[17:08:37] Taking off
[17:09:16] Climbing, pitch: 7, roll: level, 184 kts
[17:09:24] Gear lever raised at 178 ft at 190 kts
[17:10:52] Flaps set to position 0 at 2975 ft at 227 kts
[17:27:42] Cruising at 32000ft, pitch: 3, 484 kts
[17:46:46] Overspeed entered
[17:46:47] Overspeed left after a max speed of 586 kts
[00:34:46] Simulation rate set to 2X
[00:36:38] Simulation rate set to normal
[00:36:44] Simulation rate set to 2X
[00:42:06] Simulation rate set to normal
[00:42:11] Simulation rate set to 2X
[00:47:32] Simulation rate set to normal
[00:47:38] Simulation rate set to 2X
[00:52:58] Simulation rate set to normal
[00:53:04] Simulation rate set to 2X
[00:58:25] Simulation rate set to normal
[00:58:31] Simulation rate set to 2X
[01:03:35] Simulation rate set to normal
[01:03:41] Simulation rate set to 2X
[01:09:24] Simulation rate set to normal
[01:09:29] Simulation rate set to 2X
[01:15:39] Simulation rate set to normal
[01:15:45] Simulation rate set to 2X
[01:20:56] Simulation rate set to normal
[01:21:02] Simulation rate set to 2X
[01:26:46] Simulation rate set to normal
[01:26:52] Simulation rate set to 2X
[01:32:07] Simulation rate set to normal
[01:32:13] Simulation rate set to 2X
[01:37:32] Simulation rate set to normal
[01:37:38] Simulation rate set to 2X
[01:42:56] Simulation rate set to normal
[01:43:02] Simulation rate set to 2X
[01:48:12] Simulation rate set to normal
[01:48:18] Simulation rate set to 2X
[01:53:36] Simulation rate set to normal
[01:53:42] Simulation rate set to 2X
[01:58:58] Simulation rate set to normal
[01:59:04] Simulation rate set to 2X
[02:04:28] Simulation rate set to normal
[02:04:33] Simulation rate set to 2X
[02:09:49] Simulation rate set to normal
[02:09:55] Simulation rate set to 2X
[02:15:21] Simulation rate set to normal
[02:15:27] Simulation rate set to 2X
[02:20:45] Simulation rate set to normal
[02:20:51] Simulation rate set to 2X
[02:26:07] Simulation rate set to normal
[02:26:13] Simulation rate set to 2X
[02:31:28] Simulation rate set to normal
[02:31:34] Simulation rate set to 2X
[02:36:53] Simulation rate set to normal
[02:36:58] Simulation rate set to 2X
[02:42:10] Simulation rate set to normal
[02:42:16] Simulation rate set to 2X
[02:47:31] Simulation rate set to normal
[02:47:36] Simulation rate set to 2X
[02:52:51] Simulation rate set to normal
[02:52:57] Simulation rate set to 2X
[02:58:09] Simulation rate set to normal
[02:58:15] Simulation rate set to 2X
[03:03:31] Simulation rate set to normal
[03:03:35] Overspeed entered
[03:03:36] Overspeed left after a max speed of 564 kts
[03:03:36] Simulation rate set to 2X
[03:10:25] Simulation rate set to normal
[03:10:31] Simulation rate set to 2X
[03:17:50] Simulation rate set to normal
[03:19:47] Simulation rate set to 2X
[03:20:21] Simulator connection reestablished, 516 feet above, 1 from before
[03:22:34] Simulation rate set to 8X
[03:22:42] Simulation rate set to 4X
[03:23:02] Simulation rate set to 8X
[03:25:19] Simulation rate set to normal
[03:25:27] Simulation rate set to 8X
[03:26:26] Simulation rate set to normal
[03:26:33] Simulation rate set to 8X
[03:27:57] Simulation rate set to normal
[03:28:05] Simulation rate set to 8X
[03:29:22] Simulation rate set to normal
[03:29:30] Simulation rate set to 8X
[03:31:23] Simulation rate set to normal
[03:31:30] Simulation rate set to 8X
[03:32:58] Simulation rate set to normal
[03:33:06] Simulation rate set to 8X
[03:34:32] Simulation rate set to normal
[03:34:40] Simulation rate set to 8X
[03:36:12] Simulation rate set to normal
[03:36:20] Simulation rate set to 8X
[03:36:32] Descending
[03:37:37] Simulation rate set to normal
[03:37:45] Simulation rate set to 8X
[03:42:34] Simulation rate set to normal
[03:54:56] Approaching
[04:04:59] Flaps set to position 1 at 3450 ft at 216 kts
[04:06:04] Flaps set to position 2 at 3003 ft at 190 kts
[04:06:32] Flaps set to position 3 at 3005 ft at 168 kts
[04:06:48] Flaps set to position 4 at 2929 ft at 158 kts
[04:06:55] Go around conditions met
[04:06:55] Standard approach conditions met
[04:07:55] Flaps set to position 5 at 3001 ft at 145 kts
[04:07:56] Gear lever lowered at 3000 ft at 145 kts
[04:08:21] Flaps set to position 6 at 2920 ft at 145 kts
[04:08:22] Final approach, 153 kts
[04:08:37] Flaps set to position 7 at 2726 ft at 145 kts
[04:10:37] Flaps set to position 8 at 1105 ft at 148 kts
[04:12:13] Touched down at -144 fpm, gear lever: down, pitch: 5, roll: 1 degrees right, 128 kts
[04:12:56] Landed in 4163 ft, fuel: 28412 lb, weight: 356163 lb
[04:12:56] Taxiing to gate
[04:13:13] Flaps set to position 0
[04:16:24] The flight may now be ended
[04:16:25] Arrived, flight duration: 11:03
[04:16:41] Engine 2 is off
[04:16:43] Engine 1 is off

Comments

Commenter Comment
Andre Mclean I\'ve been trying to fly to Australia for so long and keep crashing. I had to use sim rate to get there before anything bad happened.
Chris Longo HRO Andre, we do not allow time compression. You need to find out the reason your sim is crashing. Go to event viewer, custom views. Avsim has whole section on CTD.
Andre Mclean I'm not seeing in the SOP that time compression is not allowed. Can you explain that part please?
Route Map